Medal hanger - RUN
A medal hanger to be screwed on wall
Holds up to 12 medals
11
52
0
239
updated October 10, 2024
Description
PDFPrint Settings:
- Layer Height: 0.2 mm
- Infill: 20%
- Supports: No supports
- Material: PLA or PETG recommended
1 holder and 4 spacer needed.
Two spacers (on bottom) should be glued with super glue
Two spacer (on Top) are attached with M3 screws.
Tags
Model origin
The author marked this model as their own original creation.
