Card Case (Compatible with cards 63x 88 mm)

This is a remix of the very cool card deck by kriswillcode.
The original was too small for my playing cards (Ellusionist and Bicyle) wich both are 63 x 88 mm sized card decks.

Iv also added a little more clearance, though ITS still a good fit.

For printing I recommend the same settings:

I recommend 3 vertical shells and 5 top/bottom layers. It was
designed around a 0.4mm nozzle and a 0.2mm layer height. With these
print settings, you won't have any infill and the case will be sturdy

• Case is bigger to fit the card size of 63 x 88 mm.
• More clearance between the top and bottom shell of 0.1mm on each side.