motorized turntable remix

the turn table base has now been turned into a fully printable motorized turn table, only items needed are a 3/4 “ inner diameter bearing 1.5”od. the roller bearings are a part # 608-2rs. the motor kit is a part number of TYC-50-5-6R-XLLB1PCS. the motor assembly has a pivot pin that allows for the pin to be removed and the motor assembly to pivot out allowing for manual control. use the original mount file for the scanner as well as the stand. the light stand is optional and use whatever lighting source you please, still trying different ones out to determine the best one. the holes for mounting are designed for solder in m4 inserts. this also includes the holes in the top plate v1 file. these holes are in place so support accessories can be made and screwed into the table to help support whatever is being scanned.  light sanding and setting of the pins might be necessary for smooth movement depending on the printer used and settings,(i always use .1 to .14 for layer height on pins), use a soldering iron as well to press the motor hex coupling into the printed gear, gear ratio seems to work pretty well with my scanner with the 6rpm motor. the top extension plate is optional.(designed for larger items) if needed the top extension plate is designed to screw down to the main top plate. reference the original model for the assembly instructions for the 3d scanner mount and holder. a ¼" nut is needed as well as a ¼" swivel mini ball head screw tripod mount(amazon reference look up) and a ¼" male to male double headed stud

designed to be motorized as well as manual control