TeePU Golf Tee Holder

TeePU Golf Tee Holder

A simple tee holder designed to be clipped onto your golf bag. Intended to be printed with TPU filament in order to accommodate different tee shaft diameters. 

Customize with PrusaSlicer:

• Right click on the part, click Add Part > (Text/SVG)
• Depth 0.5mm
• Operation - Cut

Please note that when the gcode is visualized there should ONLY be consistent extrusions on every layer. The goal is to minimize ALL unnecessary retractions. 100% concentric infill is recommended.

Recommended print settings:

• TPU
• PrusaSlicer with Arachne Perimeter Generator
• Recommended extrusion width 0.6mm or 0.4mm (the walls are 2.4mm thick, ideally the extrusion width factors into the wall thickness evenly)
• If you are having issues with curling at the seams, INCREASE the heat. Please reference these tweets for examples: https://x.com/brendonbuilds/status/1767963752681316729 https://x.com/brendonbuilds/status/1768650427363475586