Self-watering pot with level indicator

The settings I personally use is:
- 2 perimeters
- no supports
- 99% size for the Reservoir depending on your printers acuracy and how much your filament expands

Important: Indicator Base is printet with only 1 perimeter to get it as bouncy and light as possible

The Indicator is printed with a brim, to get more adhesion on the build plate + using the brim to have a bigger surface when glued to the base.

You might change this per printer, depending on model, to make it watertight.
I used an Ender 3 S1 Pro for these.