MFS SV08 Printed Rods

Didn't have the tools to cut a rod to lenth so i designed some printed rods. USE AT OWN RISK. These haven't been tested yet but the pieces do fit over them. I will update once mine is put together and it's been tested.  I've added the stls along with the 3mf of my print file. Print lengthwise for better strength with supports on build plate! Print cap standing on it's side. May have to use a pair of pliers to get it screwed on all the way. 

print 3 rods and 1 end cap. Screw the 3 rods together then screw the end cap on the last piece. 
 

Edit 10/2/24. Added photos of printed rods and finished MFS. Rods fit perfectly (may have to use some force to get them in all the way). 

Edit 12/23/24. I've been using these with no issues. I only print pla on my machine, but would probably recommend at least petg or ABS/ASA. I haven't had any warping with pla on mine. 

this is only the printed rods. please refer to the original for the rest of the parts and instructions: https://www.printables.com/model/959841-mfs-sovol-sv08

printed rods. Please refer to the original for all the other parts.