Piggy Bank ; Sparbüchse ; Modular Coin Bank

Hey there,

Ever wanted a modular Piggy Bank?

Here it is, just print 5 sides and 1 lid. For easy assembly, use a bendable material, because one piece has to be bent for assembly. Prusament PLA works fine. 

I printed mine on a glassbed and ink-jet printed the faces with a picture. Glass bed is needed for a very smooth surface. 

Please use the printbed side facing outwars while assembling.

Fitment in the print is quiet lose, so don't break your brain dealing with the elephants foot.

Print Settings

You will need 5 sides and 1 lid. Print with 0.4 nozzle or 0.6/0.8 

Part is optimized for 0.4 mm nozzle and 0.2 layer height and their multiples

Nozzle: 0.4 (0.6 0.8)

Layer: 0.2 (0.4)

Infill: doesn't matter (part will be solid)

Support: none

Print the parts as fast as you desire. The .gcode data is based on a infill speed of 80 mm/s and a wall speed of 40 mm/s. Only the first layer has to be slow for a good quality.