AM4 Motherboard to LGA115x Cooler Adapter

If you have a Prusa 3D printer, you probably already have enough square M4 nuts. You need 4 in total.

However if you don't have them on hand, the square nuts used are ~6mm width, ~2mm thick. Push them to the slots and they will create a perfect thread to attach your cooler to.

This adapter will work on AM4 motherboards, with coolers sized for a 75x75 mm size motherboard slot. Print two parts in total.

DO NOT PRINT IN PLA!

Print in PETG or any other material that is heat resistant up to at least 90°C.