Rummy tile holder (standard size) with print-in-place foldable legs

This is a tile holder for rummy (or any other game with similar tile size), which, instead of the normal inserted legs, has foldable legs.

Since the holder is too long for the bed, I have split it in two, such that one part is inserted into the other, and glued in place. The seam can then be attenuated by various techniques, What I did was using a 3D printing pen pressed against the seam with the same filament, then I sand it, and cover it with some petroleum jelly for 24 hrs (restores partially pla color), then clean it with a humid cloth.

The foldable legs are printed in place, attached to the body.

I included the original Autodesk Fusion model so you can easily modify it if you want to, for example, print it in one piece if you have a bigger printer.

Printed on an i3 MK3S+, 0.3mm layer height, with PLA.

The model is thin, so the corners tend to lift, so I added sacrificial geometry at the tips and provided 3MFs files for it.