1U 19 inch rack front panel mount for one 218mm wide switch, one raspberry pi CM4, two USB-hubs
Description
PDF1U 19 inch rack front panel mount for one 218mm wide switch, one raspberry pi CM4 (with oled display), two 4-port unpowered USB-hubs
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
1U 19 inch rack front panel mount for one 218mm wide switch, one raspberry pi CM4 (with oled display), two 4-port unpowered USB-hubs
I have tested with the NICGIGA S25-0802P unmanaged POE switch:
- 8x 2.5Gb POE ports + 2x 10Gb SFP+
You can mirror the model in the slicer, if you want to swap sides.
Print the bracket on the front.
No support material needed.
You need one metal rack mount bracket for one side of the switch.
I could not find one with the correct hole pattern.
So, I repurposed another bracket and drilled 4 new holes.
parts used for the raspberry pi :
- Raspberry Pi Compute Module 4
- Compute Module 4 Base Board
- Heatsink
- 128x32 0.91" oled display
- Samsung 256GB PM991 M.2 2242 NVMe SSD MZALQ256HAJD
The two usb hubs are Anker 4-port unpowered usb-hubs (AK-A7516012)
Included is the f3d file
This model is a variation on this model and this model
