MCSBC-SVR Mount Brackets for 5mm Enclosure Grid Plate

Brackets to interface the Multi-Chemistry Solar Battery Charger and Sensing Voltage Regulator (MCSBC-SVR) with the grid plates in many off-the-shelf enclosures. Those grid plates are frequently designed on a 5mm grid.

The holes in the standoffs (to mount the charger) have 2.35mm diameter. This is the correct size for directly threading M2.5 into the plastic. You can use 8mm, 10mm, or 12mm length M2.5 screws. I recommend M2.5x10.

There are three versions. The first requires screwing the bracket into the enclosure before attaching the charger board. The other two offer different hole placements that allow you to attach it to the enclosure plate after attaching the charger module.

-

These brackets also work great for the RAK19007 base board. Though, the RAK19007 has one screw with a weird offset mounting hole. You won't be able to use a screw on that corner. Three screws is plenty enough to keep the board secure.