This is a phone holder for a Samsung Galaxy Z Flip 5/6 to allow you to take advantage of the cover screen in the folded position and use your favorite navigation and audio apps in a 2002-2006 BMW Z4. The mount is cut away on the sides to enable the user to get to the fingerprint sensor, volume controls.
The mount should be printed in a temperature tolerant material such as PETG, ABS, or ASA. The example is printed in black Prusa PET. The Z4 Phone Mount can be printed in different orientations depending on the surface finish you desire. I decided to print the mount upright with supports in order to keep the finish and layer lines consistent, but it is quicker to lay it down flat on the bed. Examples of both orientations are shown in the pictures. Organic supports “from build plate only” work great for this, with the addition of blockers for the short bolt and center hole of the holder.
The author remixed this model.
Designed a holder for the Samsung Galaxy Z Flip 5/6 that works with the Z4 mount and short bolt from the original design.