Collapsible Sword/Lightsaber (easier print)

A easier to print version of the Collapsible Sword/Lightsaber, no added details and larger print tolerances between part
0
5
1
60
updated October 6, 2024

Description

PDF

A easier to print version of the Collapsible Sword/Lightsaber, no added details and larger print tolerances between parts.

Printed on Prusa Mini+ 0.4mm nozzle, 0.2mm layer height

Printed stock 0.2mm speed profile default settings for prusa mini+ printed first time no binding.

I reduced the size to fit on my mini+ (max 180mm height) so should fit more printers

Print with inner and outer brim to help with stability during printing, then trim off when finished to release sleeves.

Height: Collapsed:180mm, Extended:740mm

Diameter: 30mm

Sleeve thickness 1.2mm, sleeve spacing 0.75mm

Prints with threaded cap separate, so sleeves can be replaced or printed separately in another colour.

Cap may need to be threaded in and out a few times before fully fitting

Included fusion360 .step file of model

Included files with body and sleeves already separated

Was unable to update any details/models of original post

Model origin

The author marked this model as their own original creation.

License