Reolink Video Doorbell WiFi peephole adapter

Hi,

this is an adapter which you can use to install your Reolink Video Doorbell WiFi on your door instead of the peephole.

Push the power wires through the shaft, attach it to the reolink and attach the reolink to the adapter using 2x M3x6 screws. Then you can feed it through the peephole and screw it in.

There are two versions; one that will fit door thickness of 35mm and a long version, which will fit anything up to 75mm.

This is made to fit standard UK peephole size of 14mm.

I'd recommend PETG at the minimum, if you can do ABS/ASA probably best.

Print it laying down with the shaft pointing up. You will need to enable supports.

I did 4 walls and it's plenty strong, for both the screw and adapter