Description
PDFDescription
A bottle cutter that uses 608ZZ skateboard bearings (8x22x7mm), and US pennies or 5/16 washers to adjust the cut width.
Parts
2, 608 bearings (8x22x7mm) (Grind at least one side flat to use as a shearing surface. I used an angle grinder and then a Dremel with a sanding head to smooth it out. If the surface is rough it is Much harder to cut the plastic.)
2, 5/16 or 8mm bolts and nuts ( Fully threaded bolts and 8mm bolts may need shims for the bearings to overlap properly. There is a remix that moves the bolt holes closer together if the holes don't work with your bolts.)
Several US pennies or 5/16 washers. Any metal disk with a diameter less than 19.2mm will work.
Model origin
The author remixed this model.
Differences of the remix compared to the original
Improvements
Improved stronger structure
Better wheelbase to bring the bearings closer
8mm threaded rod holder to hold the bottle