8X8 LED Matrix Case / Housing

I have a confession to make….. I am an LED Addict…. I have been looking all over the place for some simple LED cases for the different size LED Matrix but I was surprised that I couldn't find any so being that I am terrible at using the different CAD programs I figured this particular build shouldn't be that difficult, and it really wasn't when using MS 3D Builder. 

So this is the first one for the 8 x 8 64 LED 2D Flat Panel Matrix, I make this model with a perfect fit, so you really don't need any glue or double sided tape or anything to keep it in the housing, though I will say that I can't guarantee that it will fit perfectly snug for all brands who make these panels. These panels are from BTF-Lighting, so I know that I will always get the same size, 

I will include the STL file as well since your Slicer Settings can change just how perfect the panels currently fit which means you may need to ass some double sided tape or glue and for that I added a ledge on all 4 walls for the LED Panel to sit on which can also be used to place some adhesive down if needed.

I also created a housing for the 8 x 32 amd the 16 x 16 LED Matrix Panels. Unfortunately, I lost my drive with all my models on it so I have to recreate those last two but I hope to get them done tonight,

One additional note, I make these all (8 x 8, 16 x 16, 8 x 32) with enough room to place an ESP32 or ESP2866 if you want to use WLED  or any other ESP LED project you might be interested in. This is why on the 8 x 8 Matrix you will notice that the ventilation holes in the back are as large was they are. This is so you can fit the wires through or to pass wires in, as well as giving enough air to keep the ESP32 from overheating. 

Please if you like or download this or any of my models please give me a like. I am no expert when it comes to creating 3D Printable models, so seeing the likes really means a lot and makes it worth it for me to frustrate myself to spend hours brute forcing my brain to learn how to create these.  

I hope to get the other Matrix Panels up here very soon. I also look forward to seeing if anyone remixes this to see what else I could have done other then create the most basic model I could come up with lol.

Thanks!

Systops