Marlin CNC pendant V3.5

13mm shorter. Complete bolt-together solution, no glue or tape. Proper M12x1.5mm cable gland with strain relief. Added custom PCB for simplicity and cleanliness.

Added Fusion 360 file if someone else wants to make some edits.

Added GRBL files to custom PCB, PCB-fab shops should be able to assemble these for you if you can't do this. Otherwise the case should be large enough for a soldered breadboard assembly.

Needed parts:

• 6x M3 nuts
• 6x M3x20 caphead bolts
• 4x M2x5 caphead bolts
• 1x 128x64 OLED
• 1x 4x4 keypad matrix
• 1x M12x1.5 cable gland
• 1x M7 push button (7mm thread)
• 1x MPG60 (60mm hand wheel encoder, 4pin)
• 1x Custom PCB, or assemble your own, or breadboards will also fit…
• 1x 3D print (Face, Housing)

Thanks a lot to arminth and TheOrneryMaker for all the work they did!

*EDIT! 7/11-24 Added BOM file for the custom PCB

13mm shorter. Complete bolt-together solution, no glue or tape. Proper M12x1.5mm cable gland with strain relief. Added custom PCB for simplicity and cleanliness.