ZSA Voyager Tenting & Wrist Rest Kit

This is a kit I made for my keyboard ZSA Voyager (https://www.zsa.io/voyager) for 3 combined purposes:

• Add the tenting of the keyboard to 7.5 degrees
• Provide fixed location for wrist rest pads (model = Fellowes wrist pad for mouse, very comfortable, durable, quite cheap, and easily available)
• Option to bind the two halves together, to keep them aligned at a fixed distance, which is helpful in the learning phase (muscle memory works better when removing a source of variation between 2 typing sessions)

No gluing, no screwing. The keyboard remains in place thanks to the magnetic feet of the keyboard, finding their place in the holes in the support.

If your printer has a smooth and clean bed, you should print with the upper side of the support laying on the bed. Otherwise, print with the lower surface down, but make sure the top surface remains horizontal to avoid unaesthetic steps or brittle edges on the top surface in contact with your hands (be aware this will require quite a lot of support material).

This version fulfills my needs (I have been typing with it for one month full time now), but let me know in the comments if you have any remark or suggestions for improvement.

By the way, great keyboard!