Spacer for M3 inserts - 20 mm height

Hello everyone!

This is the second of the spacer in the series. 

Unlike the first, this one is 20mm high and the internal hole is 18mm, therefore an m3 x 16mm screw can be inserted without problems. You can find the first model 10 mm high here

I've used PETG for print this, but you can use PLA without problems. I suggest to print it with layer height 0.2 mm and isn't necessary the brim for better adhesion.

You can attach the bottom of spacer with glue like Super Attack in any surface.

I hope this second project in the series will be of interest to you. If so, please Like and give me a BOOST!