USB Capture Card cooling lid (MS2130 USB-3 VARIANT)
Modified to allow for the heat-sink and USB 3.0 header to fit
1
7
0
70
updated October 21, 2024
Description
PDFI'd recommend checking to make sure that the USB connector is fitting flush, my card had cold solder joints and was becoming bent.
Model origin
The author remixed this model.
Differences of the remix compared to the original
Modified the lid so that the heat sink can slide in without removal. The USB area was modified to fit the slightly different size and PCB position. May or may not work with the USB 2.0 MS2109 style cards.