Wristband Extension for Dive Computer - 6 Extra Holes

Wristband extension for Mares dive computer with 6 extra holes, perfect for drysuits. Secure with a paper clip or pin.
1h 0m
1× print file
0.20 mm
0.60 mm
Flex
6.00 g
1
5
0
31
updated September 23, 2024

Description

PDF

This wristband extension is designed for Mares (and other models I'm sure) dive computers, adding 6 extra holes to easily adjust your strap when wearing a drysuit. It ensures a more secure fit of your dive computer around your wrist, even with the added bulk of a drysuit.

The model is simple to print and fits perfectly with the original strap dimensions. Printing in FLEX filament is recommended for optimal flexibility and durability. However, if you don’t have FLEX filament, you can print in PLA and soften it using boiling water to give it the necessary curve. The extension can be "secured" with a small metal pin or even a simple paper clip, as shown in the pictures.

Print Settings:

  • Recommended Material: FLEX for best flexibility, or PLA with post-print softening using hot water.
  • Print Time: Approximately 1 hours (depending on layer height and nozzle size).
  • Nozzle Size: 0.6 mm recommended.
  • Infill: 15% gyroid for flexibility and strength.
  • Supports: Not required.

If you like the model, don’t forget to leave a review and post a make!

Tags



Model origin

The author marked this model as their own original creation.

License