UV-5R Radio Holder for Modular Accessory Mount (MAM)

This is designed to hold a Baofeng UV-5R and attach to the TEQ Offroad Modular Accessory Mount. This was designed around
0
17
0
117
updated September 23, 2024

Description

PDF

This is designed to hold a Baofeng UV-5R and attach to the TEQ Offroad Modular Accessory Mount. This was designed around my 3rd Gen 4Runner (1996-2002) and will also fit the 1st Gen Tacoma (1995-2004). I have not tested it with the MAMs for the 4th Gen 4Runner, 2nd Gen Tacoma, 1st Gen Sequoia, or the 1st Gen Tundra, as those hole patterns are different.

-Requires 3x M6-1.0 x 16mm bolts and nuts. Print as is, no supports needed. -For filament, I'd suggest PETG to handle hot temps inside a car, but even just 15% infil PLA is strong enough to rip the bezel off the center console by the mount. -Layer height is up to you, smaller will look better of course but 0.2mm will work fine.

Tags



Model origin

The author marked this model as their own original creation.

License