Single Extruder - Dual Color - Stingray (fusion360)

A Stingray model modified with the dual color technique. The model prints in two part that slide into each other.
46
104
0
421
updated September 23, 2024

Description

PDF

The fusion360 file is given would you like to see how I did it, to modify it , …, or if you simply want to adjust the tolerances to your needs for example.

 

Printing info:

  • Scaling down can be tricky since the tolerances will scale accordingly aswell, I recommend tweaking the tolerances in fusion first, then to scale it as you wish.
  • Split the model to its parts before printing them separately then, when done, they should simply slide into each other
  • The holes make the model more difficult to print, you will have to take some time (~10min) to clean up the underside by removing all small supports. I recommend using tree supports since they don't cover the holes with a grid like regular support do.
  •  A brim is recommended aswell to help with bed adhesion.

Tags



Model origin

The author remixed this model.

エイ(Ray)3Dデータ
by YahooJAPAN (thingiverse.com)
 

Differences of the remix compared to the original

Made a 2 color versions of the base model

License