Teile 22 / 22B / 22C
Material PLA
Layerhöhe 0,2 mm
Infill 10 %
Support 5% Tree
Teil 22A
Material TPU95
Layerhöhe 0,2 mm
Infill 100 %
Support 0
TPU A95 von 3DJake
Dieses Filament ist auch druckbar mit Bowden-Extruder.
This filament is also printable with Bowden extruder
https://www.3djake.at/3djake/tpu-a95-hellblau
The author marked this model as their own original creation.