Cr touch replacement housing/cover - Optimised for FDM printer
This is a a replacement cover/housing for the CR Touch as mine broke and the original version of this was more for resin
22
258
2
525
updated
September 23, 2024
Description
PDFRemix of the original optimised for minimal (or no( support (i.e. for FDM printing).
The base which gets screwed to the mount is 2mm thick that is thicker than the original so the Z offset will need to be adjusted (increased) after install.
Printing
I printed this in ASA so it can withstand any heat from the build plate but PETG works too.
I recommend using a 0.2 nozzle (but 0.4 works too) and as low layer height as possible. I used 0.08 on my Ender3v2 with Sprite extruder, on which it this fits perfectly.
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
Optimised for FDM printing (so it requires minimal/no support)
