solo leveling
Description
PDF
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 112.5x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.7mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Orange Transmission Distance: 5
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #12 (1.04mm) swap to Orange
At layer #13 (1.12mm) swap to White for the rest.
Model origin
The author marked this model as their own original creation.
