Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x282.62mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.1mm
Filaments Used:
PLA Sunlu Meta Black Transmission Distance: 1
PLA Sunlu Matte Blue Transmission Distance: 3
PLA Sunlu Meta Grey Transmission Distance: 3.5
PLA Sunlu Matte White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Blue
At layer #14 (1.2mm) swap to Grey
At layer #18 (1.52mm) swap to White for the rest.
The author marked this model as their own original creation.