Gizmos Marble Dispenser

This is a remix. Thank you mikevec23 for you initial design.

I made the improvements that mikevec23 suggested in his original thing.

• Increased the overall size by 5%.
• Graduated the hole in the hopper to make the marble release more reliable.
• Added a stop to the end of the feed shoot to keep marbles from rolling off.
• Shortened the connecting pegs on the base.
• In addition I added the logo.
  Please read the print settings and post-printing notes.

Print instructions

Category: Games Print Settings

Printer: Anycubic I3

Rafts: No

Supports: Yes

Resolution: .2

Infill: 10% on Base, 16% on Everything Else

Filament: Anycubic PLA Silver, Blue, White
Notes:

For the base I paused the printing around 80% and changed color (I recommend white as a base to make the marble colors pop). This made for a nice transition to the hopper. I also used supports to ensure the feed hole remained round with no sagging. Be sure to clean out ALL support material.

The logo can be printed as one piece with a pause and color change at 2mm (recommended) or printed separately and then glued together. Center and glue the completed logo to the hopper.

I used super glue for all glue-ups.

Post-Printing

Reaming the hopper.

To make the hopper fit easily on the base I carefully reamed the holes in the bottom of the hopper with a small drill. I recommend you do this gradually and carefully.