Parkside Battery Systrainer

With these parts, you can build a Tanos/Festool (T-Loc) Systainer insert to hold up to 6 Parkside 4Ah batteries and 2 8Ah batteries.** You can also install the smart charger inside the Systainer, allowing you to easily charge the batteries while they are in the case (not recommended due to possible overheating).

This insert is desighned for T-LOC systainers and NOT THE SYSTAINER³

You need a systainer hight of III (3)

### Materials:
- Use a 19mm sheet of wood and cut the following pieces:
 - One piece: 27 x 15.5 cm
 - One triangle: 10 x 14 cm
 - One triangle: 8 x 14 cm

### Assembly Instructions:
1. **Screw the parts together**:
  - Place the larger triangle (10 x 14 cm) on the left side against the wall of the Systainer.
2. **Glue the assembly to the flat insert** to create a neat and clean Systainer insert.