Toroidal Windmill 608 Bearing Mod

Toroidal Windmill - Self adjusting turbine

The smooth spinning Bearing Mod from the popular ‘Toroidal Windmill'. 

Insta Reel

• The mod uses 608 (6x22x8) Bearings for smooth & fast long time spinning.
• Beautiful Windmill with Toroidal Propeller Blades use multicolor filament for great effects
• Self adjusting to wind direction through the Tail Blade
• You can use 3 Propellers on long Axle or 2 Propellers with the shorter axle
• Full customizable with different propeller sizes, directions and different tails
• Rods are stack able to your needed height

Printing:

You need to print:

• 3x Propeller
• 3x Cap for Bearing
• 2x Distance
• Other parts one time each

You have the option to print the shorter axle for 2 propellers in this case:

• 2x Propeller
• 2x Cap for Bearing
• 1x Distance
• Other parts one time each

The rod could be a bit difficult to print, i added custom support, but clean your buildplate and apply some glue.

PETG & PLA tested👍 Prefer PETG for rod and axle.

Assembly:

Short Youtube

→ In addition you can glue the bearing cap on top on each propeller to protect the bearing.

Thanks to all followers and don't forget the virtual handshake 👍 ….Happy Printing

Info:

More Windmills with 608 Mod you find on my Patreon account.

https://www.patreon.com/BamBamDesign

Commercial license you can get here:

https://www.patreon.com/BamBamDesign/membership