Customizable fursuit goggles

Introduction:

• This is a goggle frame designed for fursuit heads with lots of customizable options!

How to customize using OpenSCAD:

1. Download OpenSCAD at https://openscad.org/.
2. Open the .scad file (Top left corner, File→Open File).
3. Turn on the Customizer Window (Top left corner, Window→Customizer).
4. Adjust the parameters in the customizer window.
5. In order to view how the glasses frame looks like after your adjustments, in the top left corner of the program, press the Preview (F5) button, then press the Render (F6) button.
6. When you are satisfied with the result, press the Export as STL (F7) button in the top left corner of the program.

Parameters:

• LensDiameter: The diameter of circles of the frame.
• FrameThickness: The thickness of the frame in the front-back axis of the frame.
• FrameWidth: The “line width” of the frame.
• LensThickness: If you wish to add acrylic lenses to goggles, put the thickness of the acrylic sheet in this field.
• PupillaryDistance: The distance between the centers of the two circles.
• $fn: The resolution for the round surface objects, keeping it at 100 should be fine.

Assembly:

• Hinges: The goggles requires two M3*20mm screw, and two M3 nut, preferablly a nyloc nut.
• Straps: The goggles requires elastic strap that's 25 mm / 1 inch wide. Measure and cut the elastic strap, then sew both ends on the either sides of the goggles. I recommend adding an adjuster to the strap for adjustability.
• Lenses: You can lasercut or hand cut acrylic sheets for the lenses, the diameter of the acrylic lenses should be the LensDiameter parameter minus 6 mm.

Notes:

• I don't personally own a fursuit head yet, so I might have missed some details, feel free to ask for changes or additional features in the comment section :)