Pegboard Pegs (OnShape fully parametric)

➡ Customize your model here

Edit configurations right from your browser and export directly, no need to install any software!

Below the variables you can edit, their defaults and what they do. 

length: 15mm, sets the length of the hook from the wall
angle: 30deg, the angle of the end part of the hook you can use this to get a steeper or flatter hook
height: 6mm, sets the height of the end of the hook

Open the link below and edit the variables in the upper right corner:

https://cad.onshape.com/documents/c149c1d71a01b633bace9294/w/52b5fe57b617213022ce6ef0/e/46b126796d5d977662b7c52d?configuration=angle%3D0.5235987755982988%2Bradian%3Bheight%3D0.006%2Bmeter%3Blength%3D0.015%2Bmeter&renderMode=0&rightPanel=configPanel&uiState=66ef23c8a972dd4643ef5aee

Fully parametric easy to generate the exact dimensions you want from the hook