Single Extruder - Dual Color - Salamanders (fusion360)

A Salamander model modified with the dual color technique. Each model prints in two part that slide into each other.
121
253
2
1065
updated September 22, 2024

Description

PDF

The fusion360 file are given would you like to see how I did it, to modify it , …, or if you simply want to adjust the tolerances to your needs for example. I also joined a decimated version of the base model in the files, it contains less triangles and is easier to use in your projects.

 

Printing info:

  • Scaling down can be tricky since the tolerances will scale accordingly aswell, I recommend tweaking the tolerances in fusion first then to scale it as you wish.
  • Split the model to its parts before printing them separately then, when done, they should simply slide into each other
  • Regular supports are recommended for the striped model
  • The dotted salamander is more difficult to print than the striped one, you will have to take more time to clean up the underside (removing supports and rounding holes). I recommend using tree supports since they don't cover the holes with a grid like regular support do.
  •  A brim is recommended for both models as it will help with bed adhesion.

---

Erratum (22/09/24): Added a second salamander model, one with dots

Tags



Awarded in the contest


Single Extruder - Dual Color
440 entries | September 20 – October 6, 2024

Model origin

The author remixed this model.

Salamander/Newt
by NotOnLand (cults3d.com)

Differences of the remix compared to the original

Made two 2 color versions of the base model

License