Ender 3 V2 Camera Arm Mount

Articulating camera mount made specifically for the Ender 3 V2 and the the Logitech C270 webcam. Assembly is straight forward and easy. The design allows you to easily remove the arm when needed for maintenance, etc via a friction fit with the bracket attached to the printer. 

The bracket uses the 2040 extrusion to mount to the printer. It is a very tight fit, but should be able to slide in with some effort, shaving, and/or sanding. Mine only required a bit of force. Not sure if this will fit other Ender 3 models. Could also be remixed to fit other camera models relatively easily

If using three ‘arms’ as I did, the hardware required is:

4 - M4x12 Philips screws (arm to arm)

4 - M4 nuts (arm to arm)

1 - M3x12 (cam pivot to cam hinge)

1 - M3x20 (camera to cam pivot)

Edit: After building this, I realized this blocks the stock drawer from opening all the way. Small oversight on my part. Will eventually get to updating this and fixing. May be able to fix, or at least improve it, by cutting off the back part of the printer bracket file.