Birth control pill case with heart - for Swingo (40mm) - easily resizable

I used the beautiful birth control pill box model by Skipperino, and made it fit for the brand of my gf.
I also added the heart, I used the simple 3D heart model by Best_codes.

The original was suitable for pill blisters with a width of 33mm, and I resized it to fit the 40mm blister.

You can resize it to your needs as well in PrusaSlicer.
Just measure the width of you pill blister, in this example 35mm, and use the following simple formula:
(100 * 35) / 40 = 87,5%
This means, you need to scale the X-axis in Prusa-Slicer to 87,5%.
Remember, to keep the other 2 axis at 100%.

This container fits pill blisters with a length of around 100-105mm.
If this is not the correct length for you, you can also proceed with the Z-axis in the same way.

I printed this in the beautiful Galaxy purple Prusament PLA.
But you should be fine to use PETG or other stuff as well.

If you have any further questions, please don't hesitate to reach out.

Resized the original to fit our pill brand and added the heart emblem