AOS UL5 V5 Build Parts (Max-Height O3 Antenna + GPS)

Max-Height Antenna and 18×18mm GPS Mount

This mount places the stock DJI antenna as high as it can go with the O3 Air Unit in the rear mounting position. It also provides a place to mount an 18x18mm GPS unit.

This print is configurable, so let me know if you'd like me to add a different GPS size, antenna height or angle (default is 25deg / 60mm).

Print Details

• Material: SainSmart 95A TPU
• Infill: Cubic
• Supports: The GPS and antenna mount requires snug supports on the horizontal area near the bottom. None are required for the mast, and none are required for the toe guards and power gasket.