Toddler shoe hanger

Made it as a modular design. Treads are loose, so should be ok for printer tolerances. For 2 pairs of shoes print 1x base, 1x top end, 1x body and 4x shoe hanger. For every other two pairs just print 1 more body and 4 more shoe hangers. When screwing the second body, start at 45 degrees and twist a litle hard at the end, so the hangers are 45° relativly to each other. Printed on Prusa MK3.5S, PLA, 0.35 layer but 0.2 for treads, standard Prusa profiles with 2 perimeters and 15% infill.