Wood Lathe - Ornamental Crosslide

Used with the gear box or without:

https://www.printables.com/model/1012167-wood-lathe-ornamental-gear-box

Maximum work piece measurements:

maximum diameter over bed ca. 300mm

Length between tool centers (=useable lentgh of the linear rails) ca. 400mm.

Included functions:

• Ornamental slide for repitions and cutting different depths for ornaments
• indexing plate for tool positioning
• indexing plate for the X-Axis to use for bowl ornamenting
• Curvelineal to copy and follow curves
• Milling Support (must be buyed https://www.paulimot.de/hoehensupport-fuer-drehmaschinen) for high adjustment
• 43mm neck adapter for square hole boring and adjusting spindle angle

05.10.24, Corrections :

• X-Axis Indexing Plate cross section
• X-Axis Baseplate Part 4 position of the connecting pins
• X-Axis Baseplate Part 3 depth of the groove for the indexing plate

06.10.24

• X-Axis Slideplate distance for the scre flanges fixed
• Y-Axis Slideplate distance for the scre flanges fixed
• Y-Axis Baseplate Part 1 holding bores new position
• Ornamental Crossslide Clamping Plate holding bore new position

24.02.25:

Bumper and Stop rod holder, correction of the position for the stopper rod bores.

01.03.25:

Spindle Holder for the Ornamental Milling frame added, to reduce weight. Two holes

for center positioning on 0° and 90°.

https://www.printables.com/model/1163642-wood-lathe-ornamental-milling-frame

28.03.25:

Baseplate for the Ornamental slide is changed, so the position of the spring holding hooks

don't affect the funktion anymore.