Tough Cable Hook / Cable Canal

About the model

Durable cabel hook to route cables along walls/desks or to hang multiple ethernet/USB/etc. cables from walls. I used this to have a place to store cables and as a cable canal were cables can be quickly routed and taken out again. It is designed for optimal flow of force.

The hooks are designed to be glued in place. There is a section in the bottom with ridges so any glue has a larger surface area to adhere to and to still sit flush to the wall.

Printing

• 3-4 perimeters
• 15-20% infill (I always prefer cubic, but any three-dimensional infill will be good)
• 1mm bottom and top solid layers (3-5 solid layers for 0.3-0.2mm layer height

There is a ready to go project file with 15 hooks with all the settings and 0.2mm layer height. You can use this as baseline and only change settings you want changed (the printer or layer height e.g.).