festool DF500 MFT3 dock

Dock to attach Festool Domino DF500 to MFT3 tables.
5h 34m
1× print file
0.40 mm
0.80 mm
210.00 g
16
59
0
524
updated September 23, 2024

Description

PDF

Dock for holding the DF500 up, to the MFT3 table aluminium profile.

Slide the dock then use 2 T-Nut from the festool@ mft accessories, 2 m5 nuts and 5x20mm bolts to hold the dock to the MFT table rail. 

The DF500 slides and is held tight by gravity and the pins from the execellent Izo@'s holder.

No clamps needed: there is a little flex, it does not impact operation. Clamps can be used to remove the flex:

 

Tags



Model origin

The author remixed this model.

festool domino dock
by Izo
Original model was switched to draft or deleted

Differences of the remix compared to the original

Add a MFT3 profile to the back of the df500 dock

License