This is a hydrometer/thermometer bracket for a P1S/X1-C.
I printed Thomas' Silica Dry Box for Bambu Lab AMS and ordered the Xiaomi Hygrometer Thermometer from Amazon. Since I'm only using one of the two in the AMS, I figured I'd make a bracket to install the second inside of the P1S.
You may get better results on the overhang by rotating the model and/or playing with different support types (I figure the overhang sits inside so don't plan on re-printing).
I'm learning SW and wanted to take a stab at designing a functional part. I've included the .step file and welcome feedback on it.
The author marked this model as their own original creation.
