This model is for personal use, If you want to support my work and get access to a commercial license you can do so on my patreon
You can also check up upcoming models on my Instagram
I love planters! I love Dragons! And I love cute things!
If you’re like me you’ll adore this cute dragon planter!
It should be quite easy to print and is available in two version, an assembled one (if you don't really care about waste) and a version to assemble yourself.
It should fit most 5cm pots but I’ve added one that you can 3D print if necessary.
Most part should assemble without glue, but for the one that need some i would advise on using CA glue (or 3D gloop if you have access to it).
You don’t need any supports for this print, I’d advise on using adaptative layers Also scaling it up will work.
The example model was printed on an X1, with a 0.4 nozzle and with Bambu green PLA, overture Black, and overture white.
Let me know if you encounter any issue in you prints so I can help you fix it
The author marked this model as their own original creation.