1s Lipo Battery Case [No Support] [Updated]

Battery case for 1s Lipos

Starting from Q4 2025, Legacy models i.e. 10 slots or flange bump latch will no longer be available. They are replaced by the more secure rail latch.

Changelog:

• [17/10/2024] - XL series
  • Introduced XL, XL SE;
     
• [21/10/2024] - Original6 and XL6 series
  • Introduced XL6 and XL6 SE with 6 slots instead of 5
     
• [31/01/2025] - Updated XL6
  • Improved slot fitment
  • Added Keychain loop
  • Improved locking mechanism
     
• [02/02/2025] - Guerrilla whooping case
  • Added Guerrilla whooping case requested by JakeFPV and HemmingsonFPV

Features:

• Holds up to 12 1s lipo batteries
• Tested compatible Lipo (DM me if you've tested more)

• Sliding cover design with satisfying clicking latch
• Additional grip pattern to prevent accidental drops
• Customisable logos (DM me)

Print Settings

• Printer: Bambu Lab P1S
• Filament material: PLA
• Layer height: Default or finer
• Wall Ordering: Outside to Inside
• Supports: No (except for keychain loop)
• Infill: 15-20%
• Infill Pattern: Hexagonal/Tri-Hexagonal/Gyroid
• Nozzle Temp: 220°C
• Bed Temp: 60°C
• Travel Speed: 500mm/s
• Acceleration: 4000-10000mm/s²
• Rafts: Doesn't Matter
• Notes: Place the lid upside down to print. Support can be added for the bottom fillet for less capable printers

Test Makes