RG35XXSP Slip On Protective Case

Printer: Modified Ender 3 V2 with Direct Drive

Material: ESun PETG Black

Nozzle: 0.4mm

Layer Height: 0.2

Wall Count: 2

Infill Pattern: Gyroid

Infill: 40%

I wanted to get a compact case that protect much of the body from scratches, but most importantly, keep the device from accidentally opening inside my bag, getting something inside it, and folding on itself.

I came up with this design in about 4 iterations. It's a pretty tight fit, and I printed with PETG so there's a little flext to it. You could print it in TPU as well I believe.

WARNING

HOWEVER, PLA AND ABS ARE UNTESTED. PRINT IN THOSE MATERIALS AT YOUR OWN RISK. It might be TOO tight of a fit to even get in, and even if you manage to slip it into the case, PLA and ABS not being as flexible as PETG might get it hard stuck inside, even with the push slot I provided at the bottom!