Amateur Radio so-239 Bulkhead Inlet Mount

Bulkhead inlet mount for 2 SO-239 Connectors with the flanges. making this for a friend who was putting his HF radio into one of those black plastic Harbor Freight Tools brand protective carry suitcase. https://www.harborfreight.com/3800-weatherproof-protective-case-large-black-63927.html  He cut out one of the sections in the top lid, see photo . Print this at 102%. holes should be 16mm. Printed on a Creality Ender 3 Pro.  It's a work in progress and i will correct the skew in my printer for a more accurate print size.  Print between 100 and 102% and it should work just fine. 

The Bulkhead Flange is 67x43 mm, or 2.64 inches x 1.69 inches.   It is 10mm deep.  

Filament is Fillamentum NonOilen  I printed it at  180/35  

 Normal range for printing is 175-195c nozzle and bed 0-50C

it's a pretty tough plastic and good to 110C.   
https://fillamentumusa.com/products/nonoilen

You could also print it in PETG.   I use 230C nozzle and 60C bed..


 73 de KB2QQM