Lamina Hueforge Deadpool & Lobezno

Hola!

En este caso os comparto una lamina que he creado de la pelicula de Deadpool y Lobezno para imprimir el varios colores, todos de SUNLU para que el TD sea el correcto. os Adjunto los datos de impresion y los colores usados y en que capa cambiarlos:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x149.84mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 3mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Grey Transmission Distance: 2
PLA Sunlu Meta red Transmission Distance: 7
PLA Sunlu Meta yellow Transmission Distance: 10
PLA+ Sunlu White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Grey
At layer #15 (1.28mm) swap to red
At layer #20 (1.68mm) swap to yellow
At layer #27 (2.24mm) swap to White for the rest.

Disfrutarlo!