TGIFrogday

This amphibian has been working the 9-5 and is ready for the weekend! Designed for FDM printing on single and multicolor printers.  Check out my other designs which all work together as one modular system with interchangeable parts.

Commercial license is available for this design by subscribing to my Patreon. Digital files are not to be shared, resold, or redistributed in any form.

PRINT SETTINGS

• Perimeters: 4 on pants, sleeves, neck joint, and mug
• Top Fill: concentric on coffee
• Supports: optional on desk legs (tree type)
• Brim: recommended on sharpie barrel
• Orientation: Check reference images for eyes, mug, computer stand, and poop
• Multicolor printing: recommended on eyes (pupils - paint both the front and bottom faces - see reference image), hands (finger webbing), feet (toe webbing), mouth (paint the tongue), mug (text), plunger (handle), desk (legs), sharpie barrel, and computer screen

ASSEMBLY INSTRUCTIONS

• Push the arms forcefully all the way into the shoulder sockets
• If single color printing the eyes, color in the pupils with an ultra fine point sharpie marker
• If single color printing, use the separated STL parts for the desk (desktop + desk legs), plunger (plunger bottom + plunger handle), computer screen (computer screen back + computer screen front), and fly (fly body + fly eye x2)
• CA glue may be used to permanently attach some parts where the snap fits are loose
• Attaching accessories to the head: forcefully insert a 3/4” length of filament into the bottom of the mug and plunger (with poop in it)  then cut it down to the proper length to fit your frog