Hey, following on from my last model (https://www.printables.com/model/954115-sketch-board-drawing-board-alternative-for-samsung), I decided to make a smaller version of the previous board. I made some minor adjustments, added extra threaded holes at the back and changed the design slightly.
Printer Settings
Layer height: 0.2mm
Infill: 15%
Supports: None (depends on orientation but shouldn't be needed)
Wall loops: 2
Print time: Approximately 17 hours without stand
Printer: Bambu Lab P1S
Assembly Information
The full model – if you’re lucky to have a print bed big enough, I’ve attached the whole model.
If not, I have split the model into four pieces, one with 5mmx20mm dowel holes and one with none
LL (Lower Left)
LR (Lower Right)
UL (Upper Left)
UR (Upper Right)
(see in pictures)
(optional for split model )7-8 dowel pins 5mm x 20mm (I’ve included dial pins for printing, but you could just buy metals one for better strength)
(optional) 2 stand legs (same as previous models)
(optional for stand) 2 bolts (30mm or 20mm)
(optional for stand) Tools for Stand Installation
(optional) TPU inserts
Width: 465mm
Length: 315mm
Depth: 20mm
Coming Soon
The author remixed this model.
made the board smaller, and changed the inside design added four more threaded holes on the back