1/8 Buggy Tyre Sticks / Holder

A slightly alterned Version of ‘Hobbys’ Tyre Stick, now featuring collars at each end of the stick to prevent movement of the wheels when in use, wider locking prongs and also increased width of the body to more closely match the diameter of the wheel's hole.

Unfortunetly These changes have made it significantly more difficult to print, There is a high chance i will upload a modified version of this to be more 3d printer friendly. 

Thanks for looking and Likes, downloads, etc are much appreciated!

Ive added two cylinders at each end to prevent the wheels from moving around, as i found that the two locking prongs would fall through the hole when picking up the wheel stack sometimes. Ive also increased the width of the locking prongs to keep the end wheel more firmly attatched. 

Another major change is altering the size of the main body to more closely fit the diameter of the wheel's hole. These changes are largely ease of use based, whilst still keeping the original design somewhat the same.