Creality K1/K1C Lid Riser Side Panel Holder Gridfinity 1x2x5

Gridfinity holder with slots for the side panels of the Creality K1/K1C Hinged Lid Riser.  These side panels are removable from the riser and come in both solid and honeycomb/hex grid patterned cutout varieties, so they are often just laying around on the bench near the printer otherwise.  This keeps them organized and within easy reach of the printer when not in use.  Bin is 1x2x5 with magnet holes in the base.

Model contains raised lettering for easy identification of solid and grid panels.  This lettering is embossed 1mm onto the top of the holder.  It is designed to only require one filament change if you want to print the lettering in a different color from the rest of the print.

Print Settings (using PLA):

Nozzle: 0.4mm

Layer Height: 0.2mm

Infill: 15%

Walls: 3

No supports necessary.  Depending on plate and filament, you can use a small brim for the bases if you are having adhesion issues.

This is a holder for the side panels of the riser when not in use.  It contains slots for both the solid and honeycomb grid side panels.